Description

TAC System Quartz Sparkle Plus 90%

Product Description: 90% si02 – better suited for application in extreme conditions (temp & humidity)

Product Benefits: Durable protection for painted surfaces. Featuring slickness, high gloss, greater hydrophobic properties than UHS.

Durability/Specs: 3 years – 1 layer. Measurable thickness: 0.6um SiO2 concentration: 90%

Common Uses: Painted surfaces

Warnings: Always wear respirator & gloves. Ensure application area is free of loose contamination.

Tips / Alternate Uses: High spots are visible for 20-30min. If high spots are found within an hour of wipe off, they can be reactivated and removed with with Sparkle Plus on a new MF applicator.

Directions/Application: In a well lit, temperature controlled 50°F-85°F (10°C-30°C), & contamination free environment. Suggested section size: 1 panel at a time. Applicator Limit – Hood Size, spread evenly over the section, allow 1-3 minutes dwell time, then wipe off with new MF non linting towel. Applicator Limit 1/2 Hood Size area – then change.

For Optimal Results: First thoroughly wash vehicle with Mystic Bubble then remove all embedded iron deposits from vehicle paint pores and surfaces using Iron Zero. Next, polish vehicle surfaces to highest level. After polishing, use Oil Zero to remove all polish oils from surfaces to ensure optimal bonding and durability for the coating application.

Max Efficiency:

1] Apply Base Coat then cure with IR lamps at 165°F about 18-24” from the painted surface for 5-8 min per panel.

2] Apply Top Coat then also cure with IR lamp.

Post Application Instructions:

– Wait 1hr before topper can be added.

– 24hrs before any water exposure. Unless IR lamps used under 165°F are used 5-8 min per panel.

– Wait 7 days before first wash.