Description

QDX Graphene is a creation born from intense research, determination, and extensive testing. Ultimately resulting in the first graphene-enhanced quick detail spray to be manufactured in the UK.

How To Use:                                                                       

   Easy ✔️

First ensure your vehicle is clean and dry, as always the more preparation you can do to the vehicle prior to application the longer it will last, but as this is a fast and easy product to use this is not essential to still get good results.

Spray QDX Graphene lightly over the surface of your vehicle ensuring you only work on 1 panel at a time. Usually, 2-3 sprays are more than enough to cover an average-sized car panel. Spread the product using a clean, dry microfibre towel  There is no particular kind of towel that works best for this, although we would recommend our general weave microfibre as a great option.

Wait 1-3 mins and allow the product to cure. If in direct sunlight it will take much less time so keep a close eye on your work area.

Buff the cured product off the vehicle using a clean dry microfibre towel, we would recommend a plush towel like our 500gsm ultra-plush  you will feel the slickness building massively during this process. It’s also dead easy to remove.

Tempting as it may be to check out the water beading on this, please allow at least an hour before spraying any water on the product as it takes some time to fully develop on the surface of your paintwork and will be completely bonded after 12 hours.

FAQs: 

Q: How much graphene is in this product?

A: The product works from a 10% active content.

–

Q: Will the product leave marks on a white car?

A: No, the product colour is natural and free from any dyes or anything that could mark paintwork.

–

Q: Can it be used on a ceramic coated car?

A: Yes it is safe to use on coated cars, however, we would recommend a non-water based detail spray like synergy QD for best adhesion to the coating.

–

Q: How long will it last?

A: All depending on the situation, if it’s applied to a car with poor paint condition it would likely last around 6 weeks, on a vehicle with well-prepared paintwork it could last 6 months. This will largely depend on your vehicle but overall it is a very durable product, particularly for a spray.

–

Q: Can it be layered on other waxes or its self?

A: Yes absolutely! It bonds fantastically to its self, making it highly possible to layer this product. It also bonds very well to other waxes, particularly Si02 based waxes. It would be best used on top of wax rather than underneath.

https://youtu.be/PPNNRCHXksc

 Press Release: 

The team at Infinity Wax are excited to launch the first graphene-enhanced product in our retail range, QDX Graphene builds on the success of our existing range of detailing sprays, and with the Genable® graphene dispersions supplied by AGM we are able to take the performance of the product to the next level. A highly powerful spray product with industry leading performance that is incredibly easy to use. We would like to thank all at AGM for their invaluable support and assistance during this project and look forward to building Genable® into other product formulations going forward.”

 Michael Cipriani, Infinity Wax company founder.

Applied Graphene Materials, the producer of specialty graphene additives, is delighted to announce that INFINITY WAX, a leading innovator in car care products is set to launch the groundbreaking QDX Graphene Detailing Spray.

The detailing spray polish is the result of extensive product development and a rigorous testing programme and has ultimately produced a system that delivers an industry leading level of performance.

The launch of the product enhanced with AGM’s industry-leading Genable® graphene dispersions to the mainstream consumer in the car care market represents yet another significant milestone for the Company.

Adrian Potts, Chief Executive Officer of AGM

Safety information:

For use on finished automotive paintwork only. Avoid contact with rubber and plastic. Do not use on vehicle interior. Apply QDX Graphene in a well ventilated preferably in a dust free environment. Always wear gloves when using chemicals and avoid contact with bare skin. If irritation develops when using QDX Graphene, stop immediately and wash the affected area with plenty of cold water and introduce gentle scrubbing. QDX Graphene will cause irritation to eyes and air ways. Always stand upwind of any spray. If QDX Graphene encounters eyes rinse thoroughly with eyewash. Keep out of reach of children! Avoid using around animals, in particular reptiles and fish. If swallowed contact your local emergency services and do not induce vomiting.