FICTECH offers with Foam Wheel-121 an alkaline-based cleaning product (Ph 12-13, soda base) allowing powerful cleaning of rims with an integrated foaming agent in order to be able to use it with foaming pre-pressure sprays (IK FOAM)

The advantage of an alkaline base is the greater cleaning detergent power than a base with a neutral or even very slightly alkaline Ph. In fact, dirty rims will be cleaned more easily, while respecting the support.
The foam generated by Foam Wheel-121 is very practical for working with a brush and above all for remaining firmly on the support and avoiding falling too quickly.

Foam Wheel-121  is very economical because it is concentrated. It will therefore be enough to dose approximately 50/80ml of product into a 2L spray bottle and top up with water. The solution once diluted can be kept.

Be careful to use Foam Wheel-121 on cold rims and do not let the product dry. Rinse well after application.

Dangerous. Respect the precautions for use.

1. Dose 50 to 80ml of product into a  2L Foam Sprayer and top up with water.
2. Ideally on dry rims, spray Foam Wheel-121.
3. Brush with a rim brush and paintbrush.
4. Rinse immediately with plenty of water, do not let it dry.

Tips and tricks

To prevent your solution from becoming saturated with foam when filling, pour in the hot water first and then your dosage of Foam Wheel-121.

Work rim by rim ideally.

Remember to clean your nozzle thoroughly after use to avoid any clogging of the joints.

Attention

• Close the bottle tightly after opening.
• Do not apply in direct sunlight and/or on hot surfaces.
• Rinse the product well after application.