Everyone has encountered this problem at least once. Cement splashes on its bodywork. Once dried, it is very complicated to remove these traces without damaging the varnish.

Cement Remover  is the ideal solution for this type of problem. Particularly effective against limestone and carbonate deposits and encrustations, allows the elimination of cement agglomerates. Its high wetting power accelerates hydration and rapid penetration of solubilizing acid functions, making it possible to remove very unpleasant cement splashes.

Cement Remover is a product to be diluted in a dilution bottle, generally observing a dilution of 1:10 (one part of product to ten parts of water). Increase the concentration if necessary but always test locally first.

Do not apply on light alloys, zinc-plated, galvanized steels, sensitive to acid products. Due to the high content of active ingredients, carry out a preliminary dosage test on supports, surfaces or types of paint which are particularly fragile to cleaning products.

Always carry out a preliminary test with the surface to be treated to determine compatibility and appropriate contact time.

Dangerous. Respect the precautions for use.

1. Dose Cement Remover in 1:10 into a dilution bottle
2. Spray onto the desired surface from bottom to top.
3. Leave to act for between 10 and 15 minutes on the support.
4. Rinse well with high pressure.

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.
H335 May irritate the respiratory tract.