The Pro 9 range from Fictech is made up of 9 essential products according to the detailing stages. These products intended for professionals allow intensive use thanks to their high concentration. 

911-Prewash Cleaner is a prewash solution to easily remove sticky road grease from varnishes and other surfaces (do not contact raw aluminum or any anodized surface!).

Usable in a foam cannon or in a pre-pressure spray,  911-Pre-wash cleaner  will greatly improve your cleaning or remove sludge, droppings, midge veils, carbon deposits, etc.

911- Pre-wash cleaner will also provide a perfect finish after rinsing thanks to its slick (self-drying) effect.

Shake the bottle well  before use.

1/ Dosage of the solution: 

1L of 911 concentrate for 5L of water
5L of 911 concentrate for 25L of water

2/ Dilution for spray use: 

The concentrated washing solution obtained can then be diluted directly with a sprayer or using a dilution system (venturi system). Apply a dilution of 3 and 8%. Application possible by direct spraying or by active foam formation system. 

3/ Spray sideways from bottom to top. 

Leave to act for a few minutes. 

Rinse with clean water under pressure from top to bottom and finish with a short-term low pressure rinse to obtain shiny surfaces.

IMPORTANT NOTES: 

1- Do not contact polished or anodized aluminium surfaces. In case of contact, wash immediately with plenty of clean water.

2 – Always carry out a test with the product in advance in a hidden place to determine concentration and compatibility with the support. 

3- Never use the product in direct sunlight or leave to dry on a hot surface.

Dangerous, respect precautions

HAZARD

H290 – May be corrosive to metals. 

H314 – Causes severe skin burns and eye damage.

Components

EC 215-185-5 SODIUM HYDROXIDE