PH13 is, as its name suggests, a very alkaline Ph (13), concentrated pre-wash solution, which you will need to dilute in a pre-pressure spray bottle or a dilution bottle.
The action of PH13 will allow you to remove your road film which sticks to the lower parts of your vehicle.

This is a non-active foam based product, so it will not work in foam lance type foam cannons etc.

To be used on a dirty to very dirty vehicle, showing traces of salt, encrusted mud, dried mosquitoes, etc.

PH13 is so alkaline, that the contactless pre-wash action will significantly remove and soften the dirt film before your hand wash.

Safe for automobile varnishes, the use of PH13 should nevertheless be strictly avoided on chrome strips, anodized surfaces and unvarnished aluminum. Also avoid use in direct sunlight.

To be diluted. Dangerous. Respect the precautions for use.

SHAKE  the bottle before use.

DILUTION  75ml to 150 ml for 1L.

SPRAY  directly onto the bodywork from bottom to top.

LEAVE TO ACT FOR  4-5 Minutes

RINSE  at high pressure.

PRO TIP

To be used on a shaded vehicle and on a cold body.

Never  leave to  dry in the sun.

H290 May be corrosive to metals.

H314 Causes severe skin burns and eye damage.