Description
Ceramic wheel and brake caliper protection – NEW PRODUCT FOR 2020 from the brilliance of Angelwax. Designed with user-friendliness in focus and sponges as good for amateurs as for professionals – it only takes a few minutes to use this macro ceramic surface protection.
Angelwax ENIGMA LEGACY WHEEL & CALIPER is an easy-to-use titanium ceramic coating designed specifically for alloy wheels and brake calipers. Formulated with ease of use in mind, ENIGMA LEGACY WHEEL & CALIPER can be applied by both the professional detailer and detailing enthusiast alike and is a fabulous wheel and caliper coating that can be applied in minutes.
Unlike regular ceramic coatings, ENIGMA LEGACY WHEEL & CALIPER does not need to cure using infra-red lighting. Once applied, ENIGMA LEAGCY WHEEL & CALIPER will protect the surface from harmful fallout and contamination thus making cleaning and maintenance much easier for 2 years.
Instructions:
Clean each wheel and caliper using BILBERRY WHEEL CLEANER or REVELATION thoroughly and suitably prepare the surface removing ALL contamination. For best results, before application, polish the wheels and calipers to a high gloss finish using either REDEMPTION or PERFECT POLISH. Always apply ceramic products in a sheltered environment.
Once you are happy with the surface, remove the cap on the bottle and apply a few drops of ENIGMA LEGACY WHEEL & CALIPER onto a microfibre applicator or a suede applicator cloth which is used in conjunction with the Angelwax foam block. Apply the coating to one wheel/caliper at a time. Once the wheel/caliper has been coated, allow the coating to cure to the wheel/caliper surface for 2 minutes before removing the residue with a clean, dry, microfibre cloth. Once this has been completed, use a buffing towel to create a high gloss finish.
The curing time of two minutes is dependent on a temperature of approximately 68°f. The coating may take longer to cure if applied in colder temperatures and the coating will cure more quickly in a warmer environment.
Top Tip:
Do not use the vehicle for approximately 2 to 4 hours after the coating has been applied as this will help the crosslink density of the coating to increase. This will maximize the surface properties and increase the durability of the coating.